Hydraulic Electronic Universal Material Tension Testing Machine

Product Description

It can be used for stretching, compression and bending of various metal materials. The shear attachment can be used for shear test. It can also be used for compression test of plastic, concrete, cement and other non-metallic materials. This machine adopts the oil cylinder, low height, light weight, especially suitable for engineering construction department.

Technical parameters

1. Maximum test force: 30 tons

2. Deformation accuracy: ±0.5%FS

3. Maximum distance between two points: 450mm

4. Relative error of test force: ≤±1%

5. Test force resolution: 0.01kn

6. Motor power of pillar moving up and down: 0.75kw

7. Maximum movement speed of piston: 50mm/min

8. Stretching space: 550mm

9. Compression space: 380mm

10. Piston stroke: 150mm

11. External dimensions of the main engine: about 720*580*1950mm

12. Clamping method: manual clamping

13. Net weight: about 1900Kg

 

Conform to the standard

It meets the relevant requirements of the national standard GB/ t228.1-2010 "method of tensile test for metallic materials at room temperature" and GB/ t7314-1987 "method of metal compression test".

Product features
 

1. Safety protection device:
A. When the test force exceeds 3% of the maximum test force, the oil pump motor will stop for overload protection;
B. When the piston rises to the upper limit position, the stroke protection and the oil pump motor stop.

2. Control system:
A. Electronic force measurement, liquid crystal display test force-time curve, test force, test force peak, yield force of material with obvious yield characteristics, convenient and intuitive experimental data;
B. The mechanical properties such as tensile strength and yield strength of the material can be directly determined by entering the sample number and cross-sectional area through digital keys;
C. Can query and print the experimental results (with a micro printer).