| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Description:
This machine is suitable for vertical static loads on finished and semi-finished hinges of cabinet doors Horizontal static load Operating power Durability testing. Simulate the situation during common use by repeatedly opening and closing the hinge, and after a certain number of cycles, check whether the hinge is damaged or has other conditions that affect its use.
Compliant with standards:
1: Standard: QB/T 2189-2013 Durability Test for Furniture Hardware Cup shaped Concealed hinges
Other optional testing items include the following:
1. Operating force (optional)
2. Vertical static load (optional)
3. Horizontal static load (optional)
2: Standard: GB/T 10357.5-2011 7.1.4 Durability Test for Sliding Doors
Technical parameters:
1. Test speed: 1-18 times/minute (adjustable)
2. Testing station: It can move left and right, suitable for cabinets with left or right doors, and can be used for testing finished cabinet doors or single product hinges (tooling required)
3. Testing fixture: detachable, can move up and down, and the test door meets the standard requirements (as shown in the figure below). It is suitable for testing cabinets of different heights (maximum sample size: approximately 1800 * 1900 * 550mm)
4. Test angle: Servo adjustable from 0-180 °.
5. Drive device: using high-precision servo motor
6. Machine frame: Made of high-strength industrial aluminum profiles 80 * 80mm
7. Load carrying weights: 1kg, 2 pieces
8. Loading: 0-500N, (load shutdown can be set, only for evaluation purposes)
9. Absolute error of measured travel: ≤ ±0.25m
10. Travel control range: 0.05-99.9km with a scale of 0.25m
11. Absolute measurement time error: 0.1 seconds
12. Durability test: Place a certain load on the cabinet door and hinge, perform repeated opening and closing actions, and after a certain number of cycles, check whether the hinge can still meet the usage requirements.
13. Vertical static load: Suspend the specified load at a distance of 100mm from the farthest side of the cup-shaped concealed hinge, and open and close the door 10 times in a reciprocating motion. Each time, from a distance of 45 degrees from the fully closed position to a distance of 10 degrees from the fully open position, reciprocating once does not count for one cycle. The maximum opening angle is 135 degrees from the fully closed position.
14. Horizontal static load: At the fully open position of the door, apply the specified load on the horizontal centerline 100mm away from the side of the cup-shaped concealed hinge in the direction perpendicular to the door plane. Conduct the test 10 times, and inspect after unloading at the end of the test.
15. Control mode: PLC+human-machine interface
16. Dimensions: Length 2060mm, Width 1500mm, Height 2600mm
17. Power supply: 220V, 5A
Product features:
1. It can be used for testing in installed products, firmly connected to various hinges, and should not produce any force that affects the testing. Finished cabinet doors can also be directly tested.
2. The pulling length and angle of the testing equipment can be adjusted according to actual testing requirements, and the angle can be adjusted from 0-180 ºC.
3. The whole machine is stable and beautiful, with no exposed moving parts, and easy to operate.
){kind=link}