| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Power Supply: | Yes |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product name:
Xenon Lamp Aging test Chamber
Product description
Xenon arc lamps that simulate the full spectrum of sunlight can reproduce the destructive light waves existing in different environments, providing corresponding environmental simulation and accelerated tests for scientific research, product development and quality control.
The light resistance and weather resistance of certain materials under the action of high-temperature light sources are evaluated by conducting aging tests on material samples exposed to the light and thermal radiation of xenon arc lamps. It is mainly used in the automotive, coating, rubber, plastic, pigment, adhesive, fabric, aerospace, shipbuilding, electronics industry, packaging industry, etc.
This xenon lamp weathering test chamber can be used for the selection of new materials, the alteration of existing materials or the assessment of durability changes after the composition of materials changes. It can well simulate the changes that materials undergo when exposed to sunlight under different environmental conditions.
Conform to the standard
GB/T16422.3, 15422.1 AATCCM16, ASTM-D4459, GBT2423.24
Detailed parameters
| Specification | Water-cooled type | ||
| Model: | LT-SW-280G | LT-SW-500G | LT-SW-1000G |
| Internal dimensions WxHxD (mm) | 600*600*800 | 800*800*800 | 1000*1000*1000 |
| External dimensions WxHxD (mm) | 1300*1250*1950 | 1200*1400*2050 | 1400*1600*2200 |
| Turntable diameter (mm) | Φ400 | Φ600 | Φ800 |
| Temperature range | RT+10ºC~70ºC | ||
| Test the temperature of the blackboard | Adjustable from 40ºC to 100ºC | ||
| Humidity uniformity | ≤±3ºC | ||
| Temperature accuracy | ≤±0.1ºC | ||
| Humidity accuracy | ≤±1ºCRH | ||
| Temperature and humidity sensor | PT100Ω/MV platinum resistor | ||
| Turntable/Rotational speed | Φ600mm;1~3r/min | ||
| Lamp tube light source | One water-cooled lamp tube (Teelong) | ||
| Lamp tube lifespan | 1,000 to 1,200 hours | ||
| Lamp tube power | 4.5KW/6.5KW | ||
| The distance from the arc center to the sample | The effective exposure area to sunlight is 640cm ², ranging from 250 to 300MM | ||
| Illumination cycle time | It is continuously adjustable from 0 to 999 hours,M and S | ||
| Rainfall time | Continuous rainfall from 0 to 9999 minutes is adjustable | ||
| Rainfall cycle | The rainfall at intervals of 1 to 1 minute is adjustable | ||
| Water spraying cycle | 18 minutes /102 minutes or 12 minutes /48 minutes (water spraying time/no water spraying time) | ||
| Rain water pressure | 0.12~0.15Mpa | ||
| Nozzle aperture | Φ0.8mm | ||
| Standard sample size | 75mm*150mm | ||
| Spectral wavelength | 290-800nm | ||
| Xenon lamp radiation intensity | The 290-800nm band is 500-1120w/m ² | ||
| Filter type | Simulate the light passing through the glass window. You can choose either a sun exposure filter or an ultraviolet filter | ||
| Material | The outer box is made of high-quality carbon steel plate, with phosphating electrostatic powder coating treatment /SUS304 stainless steel. The inner box is made of SUS316 high-quality stainless steel smooth plate. The sample rack is made of SUS316 high-quality stainless steel strips. The door frame is equipped with high and low temperature resistant silicone rubber door sealing strips | ||
| Usage conditions | Voltage :380:10%V,50±1%HZ, Power :15KW three-phase five-wire system | ||
| Environmental conditions | Temperature: 5ºC to 30ºC, relative humidity: ≤85%RH, Air pressure: 86kpa to 106kpa | ||
| Safety device | Leakage, short circuit, over-temperature, water shortage, motor overheating, overcurrent protection | ||
Product Features
Adopt optical fiber transmission
Measure the radiation intensity of xenon lamps to avoid the problem of measurement value errors caused by temperature reasons.
Sample holder
The blackboard thermometer BPT or the black standard thermometer BST has been installed.
Record
For each test working time, the equipment is equipped with a timer on the operation panel, which can control the equipment time. When the timer ends, the equipment will automatically shut down.
Protective device
A protective facility that ensures the xenon arc lamp can operate normally and is not easily damaged. When the door is opened, the xenon lamp automatically extinguishes and the entire machine stops working.
Xenon lamp tube
Vertically installed at the center of the box, a drum-type sample rack is installed around the lamp tube. There are several standard-sized fixtures on the sample rack.
Equipment operation
The sample holder rotates around the lamp tube to ensure irradiation uniformity at each Angle. Therefore, the water-cooled xenon lamp aging test chamber is suitable for thin sheet-like or slicing samples
Product structure
It is composed of a test chamber, a heating/lighting system and electrical control
){kind=link}