| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Power Supply: | 1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product description
The constant temperature and humidity test chamber is used to test the heat resistance, cold resistance, dry resistance, and moisture resistance of various materials. Suitable for quality testing of electronic, electrical, communication, instrument, vehicle, plastic products, metal, food, chemical, building materials, medical, aerospace and other products.
GB11158 Technical Conditions for High Temperature Test Chamber
GB10589-2008 Technical Conditions for Low Temperature Test Chamber
GB10592-2008 Technical Conditions for High and Low Temperature Test Chambers
GB/T10586-2008 Technical Conditions for Damp Heat Test Chamber
GB/T2423.1-2009 Low temperature test chamber test method
GB/T2423.2-2009 High temperature test chamber test method
GB/T2423.3-2008 Damp Heat Test Chamber Test Method
GB/T2423.4-2008 Alternating Damp Heat Test Method
GB/T2423.22-2008 Temperature Change Test Method
IEC60068-2-1.2005 Low Temperature Test Chamber Test Method
IEC60068-2-2.2005 High temperature test chamber test method
GJB150.3A High Temperature Test
JB150.4A Low Temperature Test
GJB150.9A Damp Heat Test
Detailed parameters
|
Model |
LT-TH-50(T~S) | ||
|
Internal dimensions WxHxD (cm) |
W350×H400×D350 | ||
|
Dimensions WxHxD (cm) |
W135×H950×D700mm | ||
|
Temperature range |
-70ºC~+150ºC | ||
| (T:-20ºC,F:-40ºC S:-70ºC ) | |||
|
Humidity range |
20%~98%R.H.(10%-98%R.H/5%~98%R.H for special selection conditions) | ||
|
Temperature and humidity analysis accuracy/uniformity |
±0.1ºC;±0.1%R.H./ ±1.0ºC;±3.0%R.H. | ||
|
Temperature and humidity control accuracy/fluctuation |
±1.0ºC;±2.0%R.H./ ±0.5ºC;±2.0%R.H. | ||
|
Heating/cooling time |
About 4.0 ºC/min; About 1.0 ºC/minute (a decrease of 5-10 ºC per minute is a special selection condition) |
||
|
Internal and external materials |
The whole machine is made of cold-rolled steel plate, spray painted, and baked with SUS 304 # stainless steel plate matte surface treatment. The inner box is made of stainless steel | ||
|
Insulation material |
High temperature resistant and high-density vinyl chloride acetate foam insulator material | ||
|
Cooling system |
Air cooled/single-stage compressor (-0 ºC~-40 ºC), air cooled/two-stage compressor (-40 ºC~-70 ºC) | ||
|
Protector |
Non fuse switch, compressor overload protection switch, refrigerant high and low voltage protection switch, over humidity and over temperature protection switch, fuse, fault warning system | ||
| Accessory | Recorder (optional), viewing window, 50mm test hole, PL box light, partition, dry wet ball gauze | ||
| Controller | South Korea "TEMI" or Japan's "OYO" brand can be chosen | ||
| Compressor | French "Taikang" brand | ||
| Power | 1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz | ||
Product features
1.On average, it saves about 30% to 70% electricity;
2.It can save about 80% of water;
3.Approximately 65 ± 3 dB (measured 1M from the front of the machine).
){kind=link}